Technology

taller-mecanizado-1024x576
uniaxial-pressing

Uniaxial pressing

Uniaxial pressing or Die Pressing is a method of powder compaction in which pressure is applied to the powder placed in a die by 2 rigid punches. It is appropriate for mass production of simple parts. Steelceram owns and runs several presses according to the piece to be produced.

 

 

 

 

 

 

isostatic-pressingIsostatic pressing

Isostatic pressing is a method of powder compaction in which pressure is applied to the ceramic powder from all directions. The powder is inside a flexible mould which is immersed in a liquid which applies the pressure. It is appropriate for production of large or complicated parts. Steelceram owns and runs several presses according to the piece to be produced.

 

 

 

 

 

Pressure injection molding
injection-molding

Injection molding is a method of powder compaction in which the ceramic powder is fed and injected in a mold by a screw rotating in a cylinder. This process is very similar to the plastic injection molding and permits the production of small and complex parts. Steelceram owns and runs several injection technologies according to the piece to be produced.

 

 

 

 

 

Slip castingslip-casting

Slip casting is a method of shape forming ceramic slurries. The slurry is poured into a mold of porous material. The mold soaks the liquid from the slurry consolidating the part.

No se admiten más comentarios